Sunshine Hutch
- Suits 1-2 bunnies
- Measures 2.25m long, 1.3m wide and 0.8m high
- Made from strong, yet light-weight, aluminium frame
- Strong 2.5mm thick galvanised mesh with 25mm squares
- Galvanised mini corrugated iron and flat sheeting
- Includes removable litter tray inside housing area
- Takes between 1-2 hours to assemble, with detailed illustrated instructions provided
Made in Australia
Royal Rabbit hutches and cages are made in South Australia with quality materials and quality workmanship. Freight is available Australia wide.
Aluminium Framework
Aluminium is much lighter than steel which means less strain for you to move your hutch around your yard. Also, unlike steel or timber, aluminum will not rust or deteriorate in the weather. You can be rest assured that your cage will be looking just as great in many years time.
Small-sized galvanized mesh
The hutches have been made using small sized steel mesh, 2.5mm thick with 25mm squares. This strong mesh is difficult to accidently damage and is impossible for foxes or rabbits to chew through!
Mini Fluted Corrugated Iron
The roof of the Sunshine Hutch is made using very stylish zincalume mini corrugated iron. Hutches are also available in Colorbond for those wishing their cage to match the colour of their fence or shed! (see upgrades section below)
Summer Ventilation
Unlike imported hutches, Royal Rabbit cages are designed and made in Australia, taking into consideration our very hot summers. There are two ventilation mesh panels on the sides of the cage to help maximize ventilation on hot days. Optional 'weather shields' can also be purchased to cover over these panels to provide extra protection in wet weather (see upgrades section below).
Mobility
As these hutches are made of aluminium, they are surprisingly light to move around your yard. With one person on either end, you can easily move your cage to a new area. Optional sets of wheels are also available for those wishing to move the cage with just one person (see upgrades section below).
Open Floor Design
The cages have an open floor design to allow your rabbits to enjoy the soil beneath the hutch. If you're concerned that your rabbit will burrow their way out of the cage, there are optional 'anti dig mesh floors' available for your hutch (see upgrades section below).
Two door access
The Sunshine Hutch enclosures have two latched doors at both ends of the cage to allow easy access to your rabbits and to provide a supply of fresh water and food.
Removable Litter Tray
There is a removable litter tray in the housing area of the Sunshine Hutch. This rests on brackets so will move along when you move your cage. This tray can easily be removed out the back door to clean off manure and to put a fresh layer of straw on top for your rabbit. This floor is easily cleaned with a hose or pressure cleaner and will dry very quickly.
Optional Upgrades
Wheels - For $50 extra, the hutches can be fitted with wheels. These are located midway along the cage and can be raised into the moving position when needed. You will find that these cages are a breeze to move.
Weather Shields - To keep your rabbit nice and cosy in the colder months, you can purchase weather shields that fit over the ventilation areas of the hutch. This includes two panels that fit over the side ventilation panels plus an additional arch shaped shield that fits inside the cage to further enclose the housing section. $50 for the three shields.
Anti Dig Mesh Floor - If you're concerned about your rabbit digging their way out of their hutch, you can purchase an anti-dig floor that covers the run section of the hutch. The mesh used is 50mm x 50mm in size with 2.5m wire thickness. Also prevents other animals from entering from the outside to get to your precious pets.
Colorbond - The hutches are also available using Colorbond materials for the roof and enclosed door ($50 extra), with the remaining materials made from Zincalume. Colorbond colours to choose from are Cottage Green, Pale Eucalypt and Deep Ocean. Please ask if you are interested in a different Colorbond colour.
Assembly Requirements
These hutches are very simple to put together and come with detailed, illustrated instructions. You’ll need a rubber mallet, an electric drill and a number 2 Philips-head driver. Assembly time should be between 1-2 hours.
Delivery Time
All cages are made in our purpose built premises in Willaston in South Australia. We aim to dispatch cages approximately 1-2 weeks after an order has been placed. Delivery with TNT generally then takes between 1-2 weeks to arrive. If you live in SA, pickup from our premises is most welcome.
See all we offer at Royal Rabbit. If you have a question, drop us a line via the contact form.
Mini Description | A fantastic modern looking arch shaped hutch. Optional wheels. Extension runs available. |
---|